WL2082i 8吋被動式陣列喇叭

  • 安裝優化的設計為更廣泛的場館帶來價格實惠且無與倫比的線陣列性能
  • 緊湊有魅力的外觀,黑色和白色,與任何安裝環境協調一致
  • 寬140°水平覆蓋
  • 經濟,易於安裝的懸掛系統具有足夠的陣列可調性。
Product Description


  • 安裝優化的設計為更廣泛的場館帶來價格實惠且無與倫比的線陣列性能
  • 緊湊有魅力的外觀,黑色和白色,與任何安裝環境協調一致
  • 寬140°水平覆蓋
  • 經濟,易於安裝的懸掛系統具有足夠的陣列可調性。

Additional Information
產品型號 WL2082i
Configuration 2½ way, biamp or triamp
High Frequency 

Low Frequency

Dual 50 W 8Ω 1" exit, 1.75" titanium diaphragm, neodymium magnet assembly
Dual 200 W 16Ω 8" woofers, 2" voice coils, neodymium magnet assemblies, weather resistant cone
Frequency Response (±3 dB) 80 Hz - 20 kHz
Frequency Range (-10 dB) 68 Hz - 22 kHz
Nominal Impedance HF: 16Ω
LF biamp mode: 8Ω
LF triamp mode: 16Ω (×2)
Sensitivity HF: 106 dB
LF: 97 dB
(4 V @ 1 m)
Continuous Power Capacity

HF: 100 W
LF biamp mode: 400 W
LF triamp mode: 200 W (×2)
Recommended Power HF: 200 W
LF biamp mode: 800 W
LF triamp mode: 400 W (×2)
Maximum Output (dB SPL at 1 m) 
Continuous / Peak

HF: 126 dB / 132 dB 
LF: 122 dB / 128 dB
Nominal Coverage Horizontal 140 degrees 
Vertical: dependent on number of elements used
Cabinet Type Ported, elliptical / trapezoidal
Enclosure Material HIPS (high impact polystyrene) with UV protectant
Finish Available in black (WL2082-i BLK) or white (WL2082-i WHT) paintable
Grille Perforated, formed aluminum
Connectors 2 x NL-8 in parallel
Pin Outs
Pins Bi-amp Tri-amp
1+/1- NC NC
2+/2- NC LF2
3+/3- LF LF1
4+/4- HF HF
Attachment Points Integral, side plate adjustable rigging system, vertical splay adjustable in 1° increments from 0° - 10°
Dimensions (HWD) inches 11.8 x 27 x 13.4
Dimensions (HWD) mm 300 x 686 x 340
Weight 37 lb / 16.8 kg net
45 lb / 20.45 kg shipping
Accessories Available FB2082-i: Fly-bar for WL2082-i, WL118-sw and WL115-sw. Available in black or white.

EB2082-i: Extension bar, allows WL118-sw or WL115-sw to be suspended behind WL2082-i. Available in black or white.

PB2082-i: Pullback bar for WL2082-i. Pulls the bottom of the array back to achieve the desired angle. Available in black or white.

AB2082-i: Angle bracket, allows greater vertical splay between WL2082-i and WL118-sw or WL115-sw enclosures in ground stacked configurations. Available in black. Requires two brackets per array, sold individually.

QRP-KIT-1: Kit of four quick-release pins for use in lieu of included bolts.
Related Products